Use this diagnostic command to trace socket activity. Normally you will not use this command unless requested to do so by SDI technical support.
Do the following if you wish to capture a socket trace:
| 1. | Start SDI FTP |
| 2. | Start the trace. |
| • | Open the SDI FTP Host menu and click on Trace Socket. |
| • | In the Select Trace File Name dialog box, specify a name for the trace file and note the folder that it is in. |
| 3. | Connect to the host computer and recreate the problem. |
| 4. | Stop the trace. Open the SDI FTP Host menu and click on Trace Socket. |
 |
| 5. | E-mail the trace file and a problem description to support@sdisw.com. |